|This tutorial from Sue Stewart was featured in our Favorite Heirloom Sewing Designs edition.|
Summertime is nearly upon us, and that means it’s time for sunny days and plenty of light-and-breezy sewing projects. In heirloom sewing, there are a handful of basic techniques we use time and time again, project after project. We’ve been sharing tutorials for some of these periodically to help those of you new to heirloom sewing. This week, we’d like to continue that series with a how-to for sewing entredeux to fabric.
Before you begin, keep in mind that the stitch settings given are not absolutes. Different machines stitch out differently. Use the settings given as starting points, adjust up or down as needed and use what works best for you.
1. Do not trim the entredeux. Place the entredeux and fabric right sides together, with raw edges even.
2. With the entredeux on top, use a straight stitch (L=2.0) to stitch in the ditch right along the “ladder” of the entredeux (see photo 1).
3. Trim the seam allowance to 1/8 inch. Roll and whip this seam allowance by zigzagging (L=1.0; W=4.5) so that one needle swing goes into the fabric right along the previous straight stitching, and the other needle swing goes off the edge of the fabric, rolling the seam allowance (photo 2). HINT: I usually do this roll-and-whip stitching with the entredeux on the bottom.
4. Press the rolled hem away from the entredeux. Stitch a tiny zigzag (L and W=1.0) from the right side so that one needle swing goes into the “ditch” right next to the “ladder” of the entredeux, and the other needle swing just catches the fold of the fabric. Starch and press one more time.
For more heirloom sewing inspiration, check out our new Heavenly Bliss Round Yoke Gown, Booties and Slip Kit. The kit includes everything you need to create the lovely “Heavenly Bliss” daygown set featured in our book Precious Baby Daygowns – Round Yoke Collection.
Sew On, Sew Well, Sew Beautiful,
Cyndi & Amelia